QRZ! Ham Radio 3/QRZ Ham Radio Callsign Database - Volume 3.iso/digests/infoham/940105.txt

Internet Message Format | 1994-06-04 | 26KB

Date: Wed,  2 Feb 94 20:10:56 PST
From: Info-Hams Mailing List and Newsgroup <[e-mail]>
Errors-To: [e-mail]
Reply-To: [e-mail]
Precedence: Bulk
Subject: Info-Hams Digest V94 #105
To: Info-Hams


Info-Hams Digest            Wed,  2 Feb 94       Volume 94 : Issue  105

Today's Topics:
               ANARTS RTTY NEWS BULLETIN 792  16/01/94
                           Callsign change
                             DSPs are hot
                         From Usenet to print
                   Ham call CDROMS & SunOS/Solaris
    Human Rights Report Available from VOA/Worldnet Public Server
                         Name of Ham store in
                              SUBSCRIBE
            WWCR 5.810MHZ 8pm 12pm Eastern(CHECK IT OUT!!)
                       X application for code?
                          Yaesu FT-41R Mods

Send Replies or notes for publication to: <[e-mail]>
Send subscription requests to: <[e-mail]>
Problems you can't solve otherwise to [e-mail].

Archives of past issues of the Info-Hams Digest are available
(by FTP only) from UCSD.Edu in directory "mailarchives/info-hams".

We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party.  Your mileage may vary.  So there.
----------------------------------------------------------------------

Date: Mon, 31 Jan 1994 06:45:21 GMT
From: munnari.oz.au!newshost.anu.edu.au!sserve!usage!metro!ipso!fawlty![e-mail]
Subject: ANARTS RTTY NEWS BULLETIN 792  16/01/94
To: [e-mail]

In article <[e-mail]> [e-mail] (Dave Horsfall) writes:
>[ ANARTS - Australian National Amateur Radio Teletype Society ]
>
>ANARTS NEWS BULLETIN 792  16/01/94
>
 [ stuff deleted ]
>--------------------------------------------------------------                        Amateur Radio Teletype :  By  FRANK  VK2FJL.
>      --------------------------------------------
>    Due  to  the  diversity of RTTY equipment  in  common  use
>among  Radio  Amateurs,   it is desirable that  a  few  simple
>guidelines  be  observed  in order to ensure that  transmitted
>data   is  received  as  it is  intended  by  the  variety  of
>receiving  equipment in use.
>
>    For  instance   -  it  is   known  that   at  least   four
>different  keyboard layouts using different keys for the upper
>case  or   upshift  characters are in  use  by   Amateur  RTTY
>stations.   Certain characters are therefore incompatible  and
>their use should be avoided.  Indeed  characters used on  some
>machines are not used at all on others.  Some examples are the
>exclamation mark, the commercial at, the ampersand, semi-colon
>and quotes.
>
Seems like an awful lot of bother, why not scrap the old metal
monster and run a protocol that supports the ASCII subset, such
as the many packet protocols in use, even PACTOR probably works.

>  Also,   some   RTTY'ers use `hard copy' teleprinter machines
>of  various  types,  the most common  being   teletype   (both
>CCITT and USA keyboard versions)  Siemens, Creed and Olivetti.
>Others  use `Glass' or   computers which run a variety of RTTY
>programs,  the main difference here being that computers reset
>almost  instantly to the beginning of a new line,   whilst the
>mechanical machines require longer time (usually 2-3  charact-
>ers ) for the carriage to fly back to the other end,  recover,
>and prepare to `do it again'.  These machines require a separ-
>ate    (CR)  and (LF) to be received at the end of each  line,
>whereas the computer  only needs the (CR). It does not see the
         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
That depends on the terminal emulation package you are running,
some need CR, some need LF, some need both CR & LF

>(LF)  and  automatically  inserts one for itself everytime  it
>sees a (CR).  Line lengths also vary for different equipment :
>e.g  24,  32,  64,  69, 72, 76, and 80 or even more characters
>per line.
>
In this case, make the line length to 24 chars, that way
more paper is used and more trees are chopped down, again,
send the mechanical monsters to the metal wrecker and get
a laptop and run packet.

>   These mechanical differences, as well as the need for uni-
>formity of layout,  e.g.  in broadcast production, necessitate
>the   publication  of  a  standard  or   protocol    for   the
>preparation  of RTTY material.
>
 [ much more deleted ]

steve


--
| Steven Blanche, Tower Technology   | email : [e-mail] |
| [e-mail]    | wk phone :    [phone]       |
| vk2kfj.ampr.org (4800@144.800)     | wk fax   :    [phone]       |

------------------------------

Date: Tue, 1 Feb 1994 20:19:33 GMT
From: ucsnews!sol.ctr.columbia.edu!howland.reston.ans.net!spool.mu.edu!sgiblab!swrinde!elroy.jpl.nasa.gov!newncar!csn!col.hp.com!news.dtc.hp.com!hpscit.sc.hp.com!cupnews0.cup.hp.com!jholly
Subject: Callsign change
To: [e-mail]

John Wiseman ([e-mail]) wrote:

: I am new to this group, so pardon me if this has been asked recently.
: I have not transmitted anything in the last 3 years due to the usual
: reasons (new job, new house, new kid, no time).  Now that I am getting
: things back into shape, I would like to know what the FCC regs are in
: regards to a change of callsign.  I moved from New Mexico where I had
: the call KA5WTO.  I would like that changed to reflect my new district
: (3), and at the same time reflect my Advanced class.  Is this possible,
: or do I just sign /3 forever?

: John
: KA5WTO

/3 forever? good god, why? There is no requirement to sign portable, so
the /3 would be for contesting or DX'ing only. If you wish to change your
call sign to reflect you class and district, filing a 610 would do it.
make sure you check the box for a new callsign.

Jim Hollenback, WA6SDM
[e-mail]

------------------------------

Date: Tue, 1 Feb 1994 19:25:10 GMT
From: mvb.saic.com!connected.com!news.sprintlink.net!direct![e-mail]
Subject: DSPs are hot
To: [e-mail]

Here's a quote from Feb. 8, 1994 PC Magazine:
"Modems and sound boards are shifting from fixed-function chips to more
versatile digital signal processors(DSPs). You'll also see DSPs speed up
video boards, enable PC-based videoconferencing products, and control
some of the cellular-phone/personal-organizer products you'll see competing
with PDAs. Because none of the programming is hardwired in, DSP-based
products are infinitely upgradable. Find a bug in the soundboard? Want to
upgrade the modem from 9,600 to 14,400 to 19,200 bps? Want to add fax?
Just download a new version of the code to the DSP from a BBS or a floppy
disk. The implications:(1)DSPs, while not cheap, are so flexible they'll
drive down board prices. (2)You'll see more two-in-one boards, such as
modem plus sound and sound plus video."

73, Cecil, [e-mail]

------------------------------

Date: Wed, 2 Feb 1994 20:28:30 GMT
From: news.service.uci.edu!ttinews!harley![e-mail]
Subject: From Usenet to print
To: [e-mail]

Back on May 13th, I published an article on USENET about a SWAT incident
that involved using my home as a command post.

Several readers suggested that I send the article to Monitoring Times
or QST.  I really did not think that either publication would have
any interest in it, but since it was already written, I sent it
to MT with a note that I can clean it up if they were interested.

They said that they were and would pay me $75 plus a year's sub, if
published.  They also said not to rewrite it too much or it would
lose the spontanaity.

So, I cleaned it up & resubmitted it.  It is on page 27 of the February
issue.  Thanks to those that suggested that I publish it!

 Paul
____________________________________________________________________________
"We hate our politicians so much that if they tell us that they lied,
we don't believe them"  -- Peter Newman
----------------------------------------------------------------------------
   Paul Blumstein, [e-mail], DoD #36, ABATE, AMA, HOG, BWA #1
            Transaction Technology, Inc., Santa Monica, CA

------------------------------

Date: Tue, 1 Feb 1994 17:49:19 GMT
From: ditdah![e-mail]
Subject: Ham call CDROMS & SunOS/Solaris
To: [e-mail]

Ken Stamm ([e-mail]) wrote:
: I am considering purchasing one of the popular ham-related
: CDROMs on the market such as Buckmaster or QRZ!.

: How useful are these to the non-Intel/DOS/Microsoft
: population out there who use Sun SPARC SunOS/Solaris?

: I wish to use them for their callsign databases.

: Can I mount these CDROMs from SunOS/Solaris? (ISO9660?)


Yes. Any CDROM that is ISO9660 will work on a Sun.


: Is the callsign database contained therein usable without
:    any of the x86 .EXEcutables that may be there?
: Is the callsign database in a reasonably massageable format
:    that a reasonable C program could grok?

C source code for the retrieval software is included for Unix.
This software would probably also work under other systems, although
some modifications would no doubt be necessary.

--
Michael R. Johnston       Linux Technical Support Service: [e-mail]
[e-mail]        Linux on Disk: [e-mail]
Morse Telecommunications  Unlimited, flat-rate Usenet feeds: [e-mail]

------------------------------

Date: Tue, 1 Feb 1994 19:12:13 GMT
From: voa3![e-mail]
Subject: Human Rights Report Available from VOA/Worldnet Public Server
To: [e-mail]

The full text of the annual report on the status of internationally
recognized human rights that is prepared each year by the U.S. State
Department is now available via anonymous FTP, the Internet Gopher and
electronic mail from the public Internet server maintained by the Voice
of America and Worldnet Television.

The report may be found in the directory pub/documents/human_rights_94
(FTP) or in the "Miscellaneous Public Documents" menu in the "All Files
Available from VOA and Worldnet" hierarchy (Gopher).

The report is divided into individual country segments to make it more
maneageable.


Anonymous FTP Access
====================

Host:  ftp.voa.gov
Logon:  anonymous
Password: <your electronic mail address>


Internet Gopher Access
======================

Host, Port: gopher.voa.gov, 70

Link Info:
--------------------------------------------------------------------------
Type=1+
Name=Voice of America and Worldnet Television
Path=
Host=gopher.voa.gov
Port=70
Admin=VOA Computer Services Division, [phone] <[e-mail]>
--------------------------------------------------------------------------


Electronic Mail Access
======================

Address: [e-mail]

To request emailed instructions on how to use the server, send a message
with the contents "send help" to the above address.

To request emailed instructions on how to use the server plus an index
of available files, send a message with the contents "send index" to the
above address.

--
Chris Kern     [e-mail]     ...uunet!voa3!ck     [phone]

------------------------------

Date: Mon, 31 Jan 94 02:03:00 -0005
From: wyvern!select![e-mail]
Subject: Name of Ham store in
To: [e-mail]

 On 01-30-94 [e-mail] wrote to ALL...

 K > : Can anyone hel pme with the name, address and phone number of
 K > : a ham store in Virginia?

     Ham Radio Outlet...14803 Build America Dr. Woodbridge, Va.
     ph...703-643-1063

          RON HAUGER**KC4KNA**WATCHER OF THE SKIES
          Norfolk,Virginia. USA.
          [e-mail]

---
 * OFFLINE 1.56

------------------------------

Date: 2 Feb 94 19:30:36 GMT
From: [e-mail]
Subject: SUBSCRIBE
To: [e-mail]

SUBSCRIBE

------------------------------

Date: 3 Feb 1994 01:10:14 GMT
From: dog.ee.lbl.gov!agate!hil1mac39.cchem.berkeley.edu![e-mail]
Subject: WWCR 5.810MHZ 8pm 12pm Eastern(CHECK IT OUT!!)
To: [e-mail]

In article <2ime0s$[e-mail]>, [e-mail]
(Eric Matthews) wrote:
>
>
> But socialism is a way to enslave people, do you think it is not?
> --


Should I treat this as a serious comment or not?  Hmmm, me thinks I should
turn the burner down before it FLAMES.

No I don't, unless you are equating socialism with communism.

Bob

------------------------------

Date: Mon, 31 Jan 1994 07:07:30 -0500
From: nntp.ucsb.edu!mustang.mst6.lanl.gov!nntp-server.caltech.edu!news.claremont.edu!paris.ics.uci.edu!csulb.edu!library.ucla.edu!agate!usenet.ins.cwru.edu!magnus.acs.ohio-state.edu!cis.@network
Subject: X application for code?
To: [e-mail]

I have been using and older version of this package (see below).  Let me
know if you find anything else.

ak>archie -s superiormorse

Host world.std.com

    Location: /pub/hamradio/unix/morse
           FILE -rwxrw-r--      92208  Apr 29 1993  superiormorse.shar

Host kiawe.soest.hawaii.edu

    Location: /pub/joe/morse
           FILE -rw-rw-r--      94994  Feb 18 1993  superiormorse
ak>

------------------------------

Date: 31 Jan 1994 19:52:43 GMT
From: library.ucla.edu!europa.eng.gtefsd.com!howland.reston.ans.net!cs.utexas.edu!swrinde!sgiblab!news.cs.indiana.edu!lynx.unm.edu!netsun![e-mail]
Subject: Yaesu FT-41R Mods
To: [e-mail]

A non-internet friend has asked me to post the following message:
--------------------------
For the Yaesu FT-41R, extended rx is accomplished by pressing the up/down
MHz arrows while powering on...giving you 420-470MHz.
  Does anyone know of the extended tx mod...I've seen the FT-11R mod
jumper matrix and wonder if the 41R matrix is similar?

Please respond to me by email as I don't get on here very often.
thanks,
Don N6CLP

--
*****************************************************************
* e-mail: [e-mail] * Don Edberg                    *
* CI$:[e-mail] * Advanced Programs & Technology*
* phone: [phone]         * McDonnell-Douglas Aerospace   *
* FAX: [phone]           * 5301 Bolsa Ave, MS 13-3       *
* Call: N6CLP                   * Huntington Bch, CA 92647-2099 *
*****************************************************************

------------------------------

Date: Mon, 31 Jan 1994 13:43:32 GMT
From: netcomsv!netcomsv!bongo![e-mail]
To: [e-mail]

References <[e-mail]>, <[e-mail]>, <2i6g6c$[e-mail]>gi.com
Subject : Re: Power Line Interference

In article <2i6g6c$[e-mail]> [e-mail] (howard n lester) writes:
>In article <[e-mail]>,
>
>An employee of our power company (Tucson Electric Power) is employed to track
>down power line interference by using radio direction finding equipment.
>He has a variety of radios in his truck, as well as a hand-held
>yagi (that looks as if
>it's cut for around 450 MHz). He is getting to be really good at this, and has
>recently helped me out by getting some ten or so poles in my neighborhood
>repaired. No more noise!
>
>The point of all this is that taking a sledgehammer to a pole is not the only
>way to pin down the noise.

 I would imagine that a sledge hammer would be a bit slow.
Couldn't you borrow a chain saw?

--
Julian Macassey, N6ARE  [e-mail] Voice: [phone]
Paper Mail: Apt 225, 975 Hancock Ave, West Hollywood, California 90069-4074

------------------------------

Date: 2 Feb 94 05:38:54 GMT
From: ogicse!news.tek.com!cascade.ens.tek.com![e-mail]
To: [e-mail]

References <2ibe9h$[e-mail]>, <[e-mail]>, <[e-mail]>
Subject : Re: Help - your Vertical Ant. experences.

Just for the record, I will state it again. A ground plane antenna has higher
gain than a vertical dipole. A quarter wave ground plane has a gain of some-
where around 6 db over isotropic where a dipole has a gain of 2.14 db over
isotropic at it's theoritical best. Gain in an antenna is directly related
to it's RF pattern. I believe the reason a ground plane has more gain than
a vertical dipole is because it has a more concentraited pattern like an
elongated tear drop as opposed to the fat donut shape of a dipole.
 As to weather an R5 or R7 are vetical dipoles or half wave verticals,
I am no expert on them. I have never used one. But from everything I have
read about vertical antennas, they must have a ground plane to mimic the
other have of the antenna. Some systems utilize the shield of the coax cut
to a certain length to do this I believe...seems some VHF/UHF antennas lend
themselves to this. Other than that, ground rods would help as would sea water
too.
 It is true that a half wave vertical has more gain than a 1/4 wave
vertical. It is not true that a 5/8 wave vertical is the highest gain vertical.
What it is is the best compromise for the gain and angle of radiation. As the
vertical element, or any element for that matter, gets longer for a given
wavelength the major lobe/lobes eminating from the antenna start skeewing(sp)
towards the far end of the antenna. This is why long wire antennas several wave-
length long at a given frequency are directional antennas. And, why Rhombic
antennas are a combination of this characteristic.
  MY Butternut HF6V has one major drawback because of this, it is 3/4
wavelength on 10 meters and as such the angle of radiation is higher than
what would be optimum for DX. On the other bands it is better. I have worked
over 250+ countries and believe after may years of experience that the Butter-
nut vertical is one of the best multiband vertical antennas around. It won't
match a good Maco Quad or stacked 4/5 element monobanders. But it does get
trough pileups every so often.

 Duty calls so I have to go for now. Working for a living really
cramps my use of the internet.

Terry Burge
KI7M

------------------------------

Date: 2 Feb 1994 15:50:17 -0600
From: newshub.nosc.mil!crash!news.sprintlink.net!news.i-link.com!news.i-link.com![e-mail]
To: [e-mail]

References <ah301-260194121225@129.228.248.39>, <2icphn$[e-mail]>, <[e-mail]>a
Subject : Re: htx-202 or dj-162 ?

[e-mail] wrote:
: James Biehn ([e-mail]) wrote:
: : Jerry Sy ([e-mail]) wrote:
: : : I have pretty much narrowed down my choice to these two 2m ht's.

: : : I'd like to get comments and opinions from people in the net who
: : : have actually used both.

: : : currently, I am leaning towards the dj-162 because of its wide
: : : receive.

: : : please email responses if possible.
: : : thanks in advance.

: : : jerry
: : Jerry, I myself have used both and found the DJ-162 all around better in
: : its operations as well as its structure. The HTX-202 has no Mod info and
: : is virtually an unknown radio internally. Maybe time will change that, but
: : meantime technology moves on.

:    So you're saying that you *LIKE* intermod?

:    :-)

: - Rich

: --
: Rich Mulvey                 Amateur Radio: N2VDS              Rochester, NY
: [e-mail]           "Full power on half a watt."
Rich, the problem is that todays HAM is a buyer not a builder. Thae
closest thing to this now days is a loose radio and a reliable set of
mods. Is this truly HAM radio, that is the true question.

------------------------------

Date: 1 Feb 1994 17:49:21 +1100
From: unogate!news.service.uci.edu!usc!howland.reston.ans.net!agate!msuinfo!harbinger.cc.monash.edu.au!yarrina.connect.com.au!werple.apana.org.au!lsupoz.apana.org.au!sleeper![e-mail]
To: [e-mail]

References <[e-mail]>, <[e-mail]>, <[e-mail]>yarrina
Subject : Re: safety of HT antennas

In <[e-mail]> [e-mail] (Matthew Geier) writes:

>>Yes, I did think of this solution, although for mobile use when I'm on
>>a train it would not be so good since the antenna would always be
>>collecting bits of tree or tunnel or bridge or......

> Or 1.5KDC railway overhead..

Yes, that's the major problem. I doubt that the transmitter isolation
would stand up to 1500 volts DC being fed into it, and the received would
very definitely become plastic charcoal!


> Id go to the ocupational health and safety officer and present a case
>that useing these hand-helds in the cab next to ones head is a potential
>health risk, and that roof mounted attenna's should be fitted to all
>locomotives, and not just the select few that run interstate.
> Then you reduce the close emmissions to the times your are outside checking
>things.

This could be worthwhile pursuing, but of course with the new radio
system being progressively installed any action would be non-resultant.

> Not the best, but at least you have removed the situation where you are
>in a metal box, holding the annenna next to your head, with the RF bounceing
>around untill it finds a window..

Yeah - it's kind of like sitting in a microwave, except that the RF is
at UHF and not SHF. I never understood how these so-called communications
engineers worked out that we'd be able to get a decent ammount of RF
outside of the metalwork of the loco cabs. Most of the time when we're
on the older engines (hood units) the only way to get good signal levels in
and out is to stand outside on the walkway with the radio!

Craig, the Freight Raver.

--
          Craig Dewick [Freight Raver Craig] ([e-mail]).
                    - Swimming in the MUSIQUARIUM of Life -
 Always striving for a secure long-term future in an insecure short-term world.

------------------------------

Date: Tue, 1 Feb 1994 17:08:16 GMT
From: amd!amdahl!netcomsv!netcom.com![e-mail]
To: [e-mail]

References <[e-mail]>, <[e-mail]>, <[e-mail]>ans
Subject : Re: FCC Database Online For Calif.

In article <[e-mail]> posted to the Usenet Newsgroup(s)
rec.radio.scanner,alt.radio.scanner,ba.broadcast,rec.radio.amateur.misc
[e-mail] (Jim Hollenback) writes:
>Michael D. Maxfield ([e-mail]) wrote:
>
>: I too was hoping for a little different implementation.  I noticed that
>: you must exactly match the Licensee name  (MC DONALDS REST works whereas
>: MC DONALDS does not work) as it is in the licensee field.
>
>of all the things to listen to on a scanner, I still am trying to figure
>out why some one would want to listen to "that's a big Mac, .....". Watching
>paint dry must really make some people wet thier pants.
>

Actually, that was just to test the system...  Drive-ups indeed are rarely
exciting... although there may be other interesting things on the same
frequency...  I remember one day in particular, after setting up some
audio-visual equipment for a conference at a conference center I do some
work at, I sneaked a peek at the frequency on the groups wireless
microphone and punced the frequency into my car's scanner... well, within a
mile from the conference center, I picked up three different transmissions...
the local McD's... the Dave DelDotto Conference, and the treat ;-) an
aerobics class at the local Health Club  1-2-3-breath ;-)

------------------------------

Date: 30 Jan 1994 09:12:59 GMT
From: agate!howland.reston.ans.net!vixen.cso.uiuc.edu!ux1.cso.uiuc.edu![e-mail]
To: [e-mail]

References <[e-mail]>, <2i53kj$[e-mail]>, <2i5vta$[e-mail]>
Subject : Re: Illegal Activities of Dominique Cormann (Re: CB/HAM equipment)

[e-mail] (matt roberts) writes:

[FormerDirector-of-somekindGodJudgeJuryCloutCloutClout talk deleted]

>If he was in this country, and the FCC caught him, he would get in very
>serious trouble.  If we allow this sort of thing to thing to persist,
>we'll have a service that will be unusable.  How do we know this person
>will stay straight, we don't.
>     Matt Roberts n3gzm

Right on. We have no clue whether or not this guy will stay straight. Wait
a minute, how do we know you will continue to be a good ham? We don't.
If we allow this kind of uncertainty about operators to exist, we
may end up with an unuseable service. I tell you, we should form a
'committee' to (eventually) question all the hams in this great service o'
ours and make sure they are on the up and up.

/lw
--
           LunarWolf - [e-mail] - kb9iqx - T.R. Dobrowolsky
                  Natural Resources & Environmental Science
                 University of Illinois at Urbana-Champaign

------------------------------

End of Info-Hams Digest V94 #105
******************************
******************************